- LED type SMD5050
- LED quantity 30pcs/m (9pcs/foot)
- IP rating IP65
- Light color cool white +warm white
The waterproof strip LED lighting kit includes a 5m white LED strip, power adapter, controller, 3M adhesive backing and silicone-made buckle.
- The light strip adopts a dual-color temperature LED beads for chipping, with the light strip color changed with the controller and creates multi-colors.
- The LED strip light is covered with PU glue which is water-proof and can be used at the poolside or other moisture environments.
- The flexible PU glue-covered LED strip light features smooth surface, high light transmittance, rapid heat dissipation, ultraviolet protection and weather resistance, ensures its color for an outdoor lifespan of 3-5 years.
- When the rated DC voltage is 12V, the maximum power will be 7.2W, low energy consumption.
- The flexible FPC-made LED substrate allows a bending angle of no less than 60°and a bending diameter of no less than 7cm.
- This strip is easy for installation, with 3M adhesive backing or use of a buckle for fixation.
LED strip light specification
Parameters for adapter
|LED type ||MT-SK5M50503CW-WW |
|LED strip voltage(V) ||DC12V |
|Working power (W/M) ||≤4.8 |
|Light color ||Dual-color temperature (2700k/6000k) |
|LED type ||SMD5050 |
|LED quantity ||30pcs/m |
|Beam angle ||120° |
|Materials ||Fpc |
|IP mode ||Drop glue on the surface |
|IP rating ||IP65 |
|Working temperature ||-40-50℃ |
|Storage temperature ||-50-60℃ |
|Dimension(MM) ||5000*8*0.2mm |
|Inner package ||5M/Roll |
|Warranty ||2 years |
Parameters for the controller
|Input voltage ||AC100-240V |
|Input frequency ||50/60 Hz |
|Output voltage ||DC12V (constant voltage) |
|Output current ||2A(Max) |
|Output power ||24W(Max) |
|Over voltage protection ||< 15V |
|Environment temperature ||0℃-40℃、10%RH-90%RH |
|Storage temperature ||-20℃-60℃、5%RH-90%RH |
|Plug ||EU/US/AU/BS etc. |
|Wire length ||1.5M |
|Controller voltage ||DC12V |
|Control mode ||20 types |
|Control type ||24-key infrared remote controller |
|Output ||3 Channels (3*2A) |
|Power ||72W (Max) |
|Lighting arrangement ||RGB |
|Sensing distance ||< 7M |
|Working temperature ||-20-50℃ |
There is a 3M adhesive on back and you just need to tear off the protective paper and paste it on. You could cut the light strip into different lengths upon request.
- Billboards, lighting projects, house decoration or other lightings.
- Outline or road markings.
- Ceilings, corridors windows or roadway decoration.
- Backlit nameplate or sign.